How to use
Hand Mixing
Cement Mixer
-
Open the Nolka Dried Pre-Mix sack and remove the poly bag containing the cement.
-
Pour the aggregate from the sack on to a clean flat surface.
-
Add the cement from the poly bag to the agregate.
-
Using a shovel, mix the cement thoroughly with the aggregate.
-
Form a pile with the resulting mix and make an indent in the middle of the pile capable of holding water.
-
Pour a small amount of water into the indent.
-
Mix in the pile from the sides into the indent containing the water.
-
Gradually add more water to the Nolka Dried Pre-Mix thoroughly until the desired mix thickness is achieved. WARNING: Do not add too much water until you have decided how thick you want your premix to be.
-
Use the concrete mix immediately after to avoid premature hardening.
-
Allow 24 hours to harden.
-
Open the Nolka Dried Pre-Mix sack and remove the poly bag containing the cement.
-
Pour the aggregate from the sack into the cement mixer.
-
Add the cement from the poly bag to the agregate into the mixer with the mixer rotating and ensure the dry cement and the aggregate have fully blended together.
-
Add water into the mixer containing the Dried Pre-Mix slowly until the desired consistency of thickness is achieved. WARNING: Do not add too much water until you have decided how thick you want your premix to be.
-
Use the concrete mix immediately after to avoid premature hardening.
-
Allow 24 hours to harden.
*Always store Nolka Premix
bags in a dry area*
Below videos of hand mixing and simple home yard application


